GTS Filters offers a wide range of compressed air filters tailor-made to customers' specifications. Compressed air is an expensive source of energy for instrument air and pneumatic applications. The compressed air filters are for the removal of dirt, dust, rust, condensation, moisture content, exhaust fumes, and oil impurities. We design compressed air filters with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer compressed air filters with Aluminium, CS, and SS housings. Compressed air filter elements are made of various filter media like paper, synthetic, polyester, pp, coalescing, borosilicate glass fiber, activated carbon, HDPE, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh, and sintered powder. We also offer a scrubber system for moisture separation from compressed air.
Compressed air filters are classified under the below categories.
MS – Moisture Separator For the removal of 99% of bulk oil/water removal from the compressed air.
SB – Pre-Filtration Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid particles, and dust down 5 microns. These filter elements are available in 5, 10, 25, and above microns.
PF – High-Efficiency Fine Filter For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
UF – High-Efficiency Oil Removal Filtration For the removal of particles down to 0.01 micron including oil aerosols, and dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media that actively repel oil to reduce pressure drop and running cost to an absolute minimum.
AC – Activated Carbon Filtration For the removal of vapor and hydrocarbon odors giving a maximum remaining oil content of <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).
Line Size: ¼” NB to 30” NB End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld, NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn.
Material of Construction: Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L
Operating Pressure: 0 to 50 Bar
Operating Temperature: 15 Deg. C to 500 Deg. C
Flow Rate: Up to 80,000 NM3/Hr. & More
Filtration Rating: 0.003 Microns to 40 microns & above Top cover with nut & bolts type or quick opening type
Advantages:
Applications: Instrument air and Pneumatics are used in automation in almost all industries.