Air Gas Filter

GTS Filters offers a wide range of air and gas filters tailor-made to customers' specifications. Compressed air and gas are expensive sources of energy for instrument air and pneumatic applications. The compressed air filters are for the removal of dirt, dust, rust, condensation, moisture content, exhaust fumes, and oil impurities. The compressed gas filters are for the removal of any impurities in the process. We design compressed air gas filters based on various parameters like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer compressed air gas filters with Aluminium, CS, and SS housings. Compressed air gas filter elements made of various filter media like paper, synthetic, polyester, pp, coalescing, borosilicate glass fiber, activated carbon, HDPE, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh, and sintered ss. We also offer a scrubber system for moisture and dust separation from compressed air and gas.
Compressed air filters are classified under the below categories.
MS – Moisture Separator For the removal of 99% of bulk oil/water removal from the compressed air.
SB – Pre-Filtration Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[particles, and dust down 5 microns. These filter elements are available in 5, 10, 25, and above microns.
PF – High-Efficiency Fine Filter For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C.
UF – High-Efficiency Oil Removal Filtration For the removal of particles down to 0.01 micron including oil aerosols, and dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media that actively repel oil to reduce pressure drop and running cost to an absolute minimum.
AC – Activated Carbon Filtration For the removal of vapor and hydrocarbon odors giving a maximum remaining oil content of  <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF).

Line Size: ¼” NB to 30” NB End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld, NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn. Material of Construction: Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L Operating Pressure: 0 to 50 Bar Operating Temperature: 15 Deg. C to 500 Deg. C Flow Rate: Up to 80,000 NM3/Hr. & More Filtration Rating: 0.003 Microns to 40 microns & above  Top cover with nut & bolts type or quick opening type Advantages: Easy to clean Low-Pressure drop Large filtration area by pleat design. Easy to operate and maintain. Positive Sealing to prevent bypass Customized design High dirt load holding capacity Applications: Instrument air and Pneumatics are used in automation in almost all industries. Refineries and Petrochemicals Power Plants Oil & Gas Water filtration and Cooling Towers Chemical Industries Automobile Industries Steel Industries, Metals & Minerals Textile Industries Dairy and Food Industries Dyes, Inks, and paints Industries Cement Industries Fertilizers Industries Pharmaceuticals Coolant Oils and Cutting Fluids